Liner Pro is supplied to fit 6’ 6” x 2’ 6” (1981mm x 762mm) and 6’ 6” x 2’ 9” (1981mm x 838mm) door linings.

Liner Pro is supplied with u-brackets to fit door lining thicknesses between 3¾” (95mm), up to 5¼” (132mm).

Yes, other sizes can be supplied on request.

Liner Pro weighs approximately 14kg when in its bag with both 2’ 6” (762mm) and 2’ 9” (838mm) components as supplied.

Liner Pro can be assembled in ten minutes.

No tools are needed as Liner Pro uses only thumb nuts and bolts.

The door lining is fixed to Liner Pro with 1” (25mm) screws through the 6mm holes provided in Liner Pro. The screws and Liner Pro are removed after the door lining is fixed in the rough opening.

Liner Pro is plumbed into the rough opening with the use of u-brackets and wedges.

Yes, Liner Pro holds the door lining firmly until it is fixed in the rough opening after which time Liner Pro is removed.

Yes, Liner Pro has adjustable feet which allow for accurate levelling on uneven floors.

No, Liner Pro is made from powder coated aluminium and will not rust.